본문 바로가기
CONTACT US|KOREA

Hydraulic tools & system

Home > Products > Hydraulic Pump Motor


1/3HP Motor Pump KUP-35-Series

  • Hydraulic tools and system

    · Motor Power: 1/3 HP

    · Max Operating Pressure: 700bar

    · Voltage: 220V 1ph 50/60Hz

    · Reservoir Capacity: 0.8-1.6 liters

    · Light weight, Compact design for easy portability.

    · The most ideal product to prevent any injury
    which can be occurred by using hand pump.

    · Enable to maximize the efficiency of work.

    · Various models can be used with the most of hydraulic tools.

    · Can be used anywhere and under any condition with oil-tight tank.

    · Enable to be used for Hydraulic cylinder, Puncher,
    Puller, Bender. Cutter. and Hydraulic Press.

    · 220V Single phase is standard.

    · Can be used for every electric tools.

Specification

Model Flow Rate (l/min) Pressure Rating (bar) Reservoir
Capacity (liter)
Weight (kg)
Low High Low High
KUP-35RH 2 0.2 10 700 0.8 7.5
1.6(L) 8.5(L)

Features and function of each model

Model Function Weight (kg)
KUP-35RH-NC(L)

Pressure hold type. Cylinder can be stopped on forward action. Cylinder cannot be stopped on retraction.

7.5
KUP-35RH-NO(L)

While on switch is pressed, pump is running. With optionally incorporated pressure switch, cylinder can be stopped at set pressure and
cylinder returns automatically.

7.5
KUP-35RH-IN(L)

Cylinder can be stopped both on forward action and retraction.

7.5
  • Hydraulic tools and system
    Hydraulic tools and system

1/2HP Motor Pump KUP-45-Series

  • Hydraulic tools and system

    · Motor Power: 1/2 HP

    · Max Operating Pressure: 700bar

    · Voltage: 220V 1ph 50/60Hz

    · Reservoir Capacity: 2-4 liters

    · Light weight, easy to carry for maximum portability.

    · Enable to maximize the efficiency of work.

    · Can be applied to load of around 100ton.

    · Enable to be used for Hydraulic tools.

Specification

Model Flow Rate (l/min) Pressure Rating (bar) Reservoir
Capacity (liter)
Weight (kg)
Low High Low High
KUP-45SVG(L) 2.5 0.35 70 700 2 18
4(L) 20(L)

Features and function of each model

Model Function Weight (kg)
Single Acting KUP-45SVG-4(L)

A singled-acting cylinder is actuated by solenoid valve.
"Advance" with ON switch depressed and the motor running. "Retract" with the switch released and the motor stops.

17.2
Double Acting KUP-45SVG-7(L)

A double-acting cylinder is actuated by 4 way manual valve.

16.1
KUP-45SVG-8H(L)

A double-acting cylinder is actuated by solenoid valve. The cyliner can not be stopped, and pressure can not be hold.

18.5
KUP-45SVG-8WP(L)

A double-acting cylinder is actuated by solenoid valve.
Advance/ "A" port Hold/Retract with stacking type pilot-operated check valve fitted on "A" port line.
It allows pressure holding on both "A" and "B" port lines.

19
  • Hydraulic tools and system
    Hydraulic tools and system

1-5HP Motor Pump KUP_-Series

  • Hydraulic tools and system

    · Motor Power: 1, 2 , 3, 5 HP

    · Max Operating Pressure: 700bar

    · Voltage: 220V 3ph 50/60Hz

    · Reservoir Capacity: 10-15 liters

    · Can be used for industrial purpose.

    · Various models can be used with the most of hydraulic tools.

    · Quite smooth operation (80dB)

    · We guarantee the best quality.

Specification

Model Power Flow Rate (l/min) Pressure Rating (bar) Tank (liter) Weight (kg)
Low High Low High
kup-753 1HP 4.5 0.6 70 700 10 50
kup-1503 2HP 13 1.05 70 700 15 85
kup-2203 3HP 13 1.7 70 700 15 85
kup-3503 5HP 9 3 70 700 10 68

Features and function of each model

Model Function
Single Acting KUP_-HG-4(L)

A singled-acting cylinder is actuated by solenoid valve. "Advance" with ON switch depressed and the motor running.
"Retract" with the switch released and the motor stops.

Double Acting KUP_-HG-7(L)

A double-acting cylinder is actuated by 4 way manual valve.

KUP_-HG-8H(L)

A double-acting cylinder is actuated by solenoid valve. The cyliner can not be stopped, and pressure can not be hold.

KUP_-HG-8WP(L)

A double-acting cylinder is actuated by solenoid valve.
Advance/ "A" port Hold/ Retract with stacking type pilot-operated check valve fitted on "A" port line.
It allows pressure holding on both "A" and "B" port lines.

  • Hydraulic tools and system
    Hydraulic tools and system
    

Company : KOREA HYDRAULIC CO.| Brand Name : ENPOS| C.E.O : Chul-soo Sul| Location of headquarter & factory : Noksan Industrial Complex 1591-2, Songjeong-Dong, Gangseo-Gu, Busan, Korea| Tel : +82-51-832-1100| Fax : +82-51-832-1110| E-mail : enpos@enpos.co.kr

© 2013 by KOREA HYDRAULIC CO. All Rights Reserved.